For acids
Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 424/430 sealless or with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland.
Technical data:
- Flow rate: max. 60 l/min1
- Delivery head: max. 9,5 mwc
- Viscosity: min. 1 mPas - max. 600 mPas
- Outer tube diameter: max. 40 mm
- Immersion length: 1000, 1200
- Materials outer tube:
- Media / Fluids:
- Seal: Sealless or with mechanical seal
- Container:
- 1 The max. flow rate is achieved in the mentioned configuration with the medium water at 20°C and discharge height = height of outlet.
Product attributes
With drum pump F 424:
- No seal in the liquid area
- No contamination of the medium from lubricants or wear of seal materials possible
- Free from wear
With drum pump F 430:
- Pump with mechanical seal
- Pump can be taken apart without tools into two parts
Benefits
With drum pump F 424:
- No seal wear
- No bearing wear
- Low maintenance
- Built to last
With drum pump F 430:
- Easy disassembly
- Universally and flexibyl applicable
- Easy to clean as no medium can get into the inner tube
- No carrying-over of the medium - one pump can be used for different media
- Available with:
Drum pump F 430 PP-40/33 in polypropylene (PP) (max. 40 l/min)
Drum pump F 424 PP-41/36 in polypropylene (PP) (max. 60 l/min) - Commutator motor FEM 4070, 230 Volt, 50 Hz, 500 Watt
- PVC hose DN 19, 2 m long
- Hand nozzle polypropylene (PP)
- Compression gland polypropylene (PP) conductive
- Boric acid
- Fruit acids
- Phosphoric acid (up to 50%)
- Hydrochloric acid (up to 30%)
- Sulfuric acid (up to 40%)