Drum pump for horizontal use

F 430 TR

Branch: IndustrieBranch: OberflächentechnikBranch: PetrochemieBranch: Wasser-/AbwasseraufbereitungBranch: Farben und LackeBranch: Chemie

The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas.

 

  • Application areas: Ex  

Technical data:

  • Flow rate: max. 240 l/min1
  • Delivery head: max. 30 mwc2
  • Viscosity: min. 1 mPas - max. 1200 mPas2
  • Outer tube diameter: min. 40 mm - max. 41 mm
  • Length: 200
  • Materials outer tube: Polypropylene, Stainless steel
  • Media / Fluids: Acids, Alkalis, Fuels, Highly flammable media, Petroleum products, Solvents
  • Seal: with mechanical seal
  • Container: 1000 l IBC, Container with floor drain
  • 1 The maximum delivery rate is a test bench value, measured with water at 20 ° C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.
  • 2 dependent on pump model, motor and medium

Product attributes

  • Can be used for numerous media
  • For containers with floor drain
  • With mechanical seal for inner tube seal
  • Connection possibility for mobile and stationary use
  • Can be disassembled into two parts: inner tube complete and outer tube
  • 200 mm long
  • Can be combined with various motors as required
  • Temporary operation against closed valve (hand nozzle, vall valve) possible until max. operating temperature has been reached

Benefits

  • Provides highest flexibility in installation and mobility
  • Can also be used at low ceiling heights
  • Stainless steel version for use in hazardous areas
  • Can also be integrated into pipe systems
  • A horizontal centrifugal pump that can be used with different FLUX motors
  • Appropriate motors

    Commutator motors
    FEM 4070
    Delivery rate max. 215 l/min
    Delivery head max. 10 mwc

    F 457 / F 457 EL
    Delivery rate max. 200 l/min
    Delivery head max. 12 mwc

    F 458 / F 458 EL
    Delivery rate max. 200 l/min
    Delivery head max. 9,5 mwc

    F 460 Ex / F 460 Ex EL
    Delivery rate max. 200 l/min
    Delivery head max. 9,5 mwc

    F 458-1 / F 460-1 Ex
    Delivery rate max. 220 l/min
    Delivery head max. 12 mwc

    Brushless motor
    FBM 4000 Ex
    Delivery rate max. 220 l/min
    Delivery head max. 11 mwc

    Three-phase motor
    F 414
    Delivery rate max. 185 l/min
    Delivery head max. 11 mwc

    Compressed-air motor
    F 416 Ex / F 416-1 Ex / F 416-2 Ex
    Delivery rate max. 240 l/min
    Delivery head max. 13 mwc

    The maximum delivery rate is a test bench value, measured with water at 20°C at the pressure port of the pump, without accessories (hose, nozzle, flow meter). The practically achievable delivery rate is lower. It depends on the individual application, the fluid properties and the pump configuration. Please refer to technical data sheets / performance diagrams.

  • Media examples

    Outer tube material polypropylene:
    Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water  

    Outer tube material stainless steel:
    Petroleum, diesel, heating oil, hydraulic oil, machine oil, motor oil, gasoline, formic acid (as from 85 %), ethyl glycol, petroleum, "MEK (methyl ethyl ketone = butanone), octane, ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit, diesel   

  • Downloads